Opis artikla

Fleece flap disc with coarse fleece texture (slight machining effect) for descaling and derusting workpieces, preparing welding seams, smoothing welding seam flaking, sanding very fine welding seams, removing weld spatters, preparing and re-polishing welding seams, sanding fine welding seams, matting of surfaces, removing oxide films, thermal discolouration or thin layers of varnish on metals, polishing stainless steel. The gloss polishing flap disc for angle grinders is equipped withflaps made of a special high-quality felt and is typically used with polishing compounds. This gives the workpiece a mirror finish.

• First prepare the workpiece with POLIMAXX polishing flap discs in a 1–3 structure.
• The POLIMAXX 4 gloss polishing disc is always used with an appropriate polishing compound
• Start with a pre-polishing compound (e.g. white from Osborn/Unipol for stainless steel or brown for non-ferrous metals).
• Then use a high-gloss polishing compund (e.g. blue from Osborn/Unipol) to achieve a high-gloss surface.
• You should ideally use a variable-speed angle grinder. A reduced working speed of 4,500 rpm achieves better polishing results than using the angle grinder at full speed.